Quote:
Originally Posted by Phaedrus29
If this is it, I'd rather not bash the car. Could you explain in more detail what you mean by this modification?
|
Check to see if you have a resonator clearance issue. Mine was after adding the midpipe it could touch on the driver's side. So the only bracket the midpipe has it attached to the rear of the transmission. If you slot it (make the hole wider towards the drivers side) that allows the entire center part of the midpipe/catback shift toward the passenger side just another 1/4" or so and no more contact with the car. I do get a start up rattle but its clearly in my case the license plate so I'm going to put some (more) foam tape on the back of the license plate.
That hole on either the factory or aftermarket midpipe.