Quote:
Originally Posted by Chemist
246bees, MatadorRacing_F1, how can you expect that kind of torque output from a 2.0L engine without using forced induction?
Torque, at most, will probably be around 160 ft-lbs. With your standard 7,000 RPM redline that at most amounts to ~213 hp.
However, estimates (rumors) have suggested 200 hp which, when combined with a standard 7,000 RPM redline, should give a solid 150 ft-lbs of torque.
|
I just wanna know 200hp at what rev? range? anyone have any specs of where the current boxer makes most of its power? peak power? n/a model of course
EDIT:
Looked up some specs for the JDM EJ20, 190hp@7200RPM? seems kinda high? near the rev limit i suppose? also read that the redline is approx 8k, Well all in all, that only equates out to be about 140lbft.
Found some more interesting info,
so lets say it would be 200hp at 5600 rpm, that would work out to be about 187lbft, way over the estimate, but then lets say we have 150tq at 5600rpm that would net us approx 160hp seemingly more reasonable.
I'm just going off a bit of math here trying to make sense of things.
If anyone has benchmarks on the 2.0 n/a engine, and or like info of similar 2 liter n/a boxers we can work out some numbers.