[Batman]

Originally Posted by AVOturboworld

It's roughly GT28 in sizing, or from our head engineer Terry's viewpoint, good for about 400hp crank in flow.



For stage 1, yes. Remember, this isn't a 2.5-3.0 liter sized motor, it's a 2.0. For higher horsepower builds, upgrading the air box will be recommended.



While we are testing upgrades, they are just that, upgrades. Our stage 1 base kit is going to be set up for using the stock fueling. Stage 2 kits will almost certainly use upgraded fuel pumps/injectors, along with other upgrades (such as the airbox).

Quite honestly, the amount of power at stage 1 is tremendous in relation to the weight of the vehicle, the size of the motor, and being RWD.

Question with this: if I install this stage 1 kit, will i be able to put more upgrades in to equal your stage 2 kit or will I have to buy an entire stage 2 kit? I'm assuming it will be upgradeable but want to be sure