Quote:
Originally Posted by tonystewart
Would adding part of the snorkel help the Airaid?
This modification has the air entering from the colder side of the radiator.
I realize it may reduce the intake size.
I realize the air entrance isn't smooth or velocity stack shaped.
Does colder air make up for the slight reduction this little mod may offer?
Airaid made a mistake not extending the intake like the AFE, just my opinion.
I'm going to get some fiberglass and mold a scoop for this Airaid that extends into the "colder area" |
So i just did this to my stock intake as well! got this idea from 2forme because the stock snorkel does look restrictive. But instead of just leaving it plain like that i took a 4inch air flex duct and zip tied it to the front on the bumper where when end is feeding into the duct and the other is positioned where the old snorkel use to be and my car registered an extra 4g/s to the maf sensor. i went from 148.7 to 151.7. Tried to take a graph but the torque app is a little weird when it comes to graphing. Today im changing the inlet tube to the new intake i made and ill take a another graph.
