ok to give you a quick idea, i got two sets of
http://www.lulusoso.com/upload/20120...re_Harness.jpg , pulled the pins from the small ones, you need a total of 3 . Added more wire to it and put it on the 16 pin socket of the back of the radio. and added the pins on
http://i1227.photobucket.com/albums/...13/photo-3.png v+ ,v- and cground. then grounded the c ground and spliced the v+/- into one of these
http://ak.buy.com/PI/0/500/228530731.jpg v+ is the midle wire and v- is the outter. Then i went onto the 28 socket
http://i1227.photobucket.com/albums/...13/photo-4.png and added cut a wire to fit/ function as a pin, on slot 2 (rev), then run the wire to a socket right by the foot rest and tapped for reverse signal ( pm for a pic) . Next i runned the composite wire all the way to the trunk, mounted camera. grounded black wire on camera feed and tapped the 2nd or 3rd green wire from the amp ( again pm me for a diagram) the wire becomes + after acc . Im in the process of editing pictures, forgot to change my phone settings to a manageable size.