|
You might need a bit of negatice camber and possibly rolled fenders, depending on your tire selection. My wheels are also 9" wide but +28 offset. So these would stick out an additional 4mm. Not a ton, but I'm already close to rubbing in the rear.
I've got 235/45 Federals on mine, and those run a bit wide. Something like a 225/40(or 45) would probably be fine for these wheels, or even a 235/40 in a less meaty tire.
*Note: my +28 wheels are sticking out a ton in front, but no rubbing. However, I do not plan to keep these on the car so I haven't done anything about front camber. It just looks goofy for now.
|