The reverse 16-pin plugs are in, and I now have the plug-and-play camera harnesses available! These are great for those who are hesitant about modifying the factory harness, or who want the ability to quickly disconnect and go back to the stock configuration. The basic RCA cable with pins is still available also.
Link.
Several Subaru BRZ owners have tested my cables and harnesses and have been very happy.
Quote:
If you own a different Subaru or Toyota/Scion model (with an OEM HU with the same 16-pin socket for the rear camera input), I'll provide a harness at a reduced price to each person who can post pictures of each factory head unit model I haven't seen yet.
Pictures need to be the complete set of ones requested in this thread, plus these additional shots:
- Factory 16-pin harness, looking straight down at the top -- clearly showing all wires. Also one more looking at the back. All with no hands in the picture. If there are more than two wires, I may ask for a couple more shots.
- Factory 28-pin harness, looking straight at the top and straight at the bottom, with a strip of white paper or thin cardboard inserted between the two rows of wires -- so each picture only shows the single row nearest to the camera (pins 1-14 in one shot, and pins 15-28 in the second). Again, with no hands in the frame.
An FR-S owner has already promised to send pictures of his BeSpoke HU and harnesses.
People that I've already sent a harness to are still eligible -- I'll refund a portion of your purchase.
I reserve the right to limit or end this offer (especially if there are a bunch of HUs that look nearly identical except have a different model number). If in doubt, PM me first.
The car must be one you own, and the pictures ones you take yourself (not lifted from another post).
|