Quote:
Originally Posted by @Art_Mighty
Is it literally THIS simple? ;take off shift boot, pop off selector with a screw driver, reverse the wires is connected to the (+) switch and the other to the (-)?
...or is there a harness I'm cutting into?
|
Yes its pretty simple! Once you take off the trim piece there will be 2 black wires and two white wires going to the little momentary switches. just reverse them. Or if you want take the actual shifter apart and reverse the momentary switch location. Be careful taking apart the shifter though a little pin will fall out and its hard to put back in.
Lmk if you need anymore help.
Paul