Thought I would start a thread on ECUtek where we can all pool our experience to make the best of the product.
If there are trolling comments or negative comments, keep it to yourselves or start a new thread unless it is constructive.
I’ll start:
I had some issues installing and getting the flash done, no fault of John, different end of the world.
So here are the problem and solutions.
PROBLEM:
Installed software but the cable is not communicating.
Error: CANUSB drivers not found or CAN errors. Not communicating with car.
Solution: Go to
http://www.ecutek.com/Downloads.aspx and select the
Download Hardware Drivers and download the latest drivers.
PROBLEM:
Cannot flash car, error you do not have a license.
I’ll need more clarification on this one
Solution: Check to see id license is 1. I had two files sent to me. So do a license update with the first file and check license is 1. Once you run the flash, license should gets reset to 0. Update license file with new file and license will come as 1 again.
If you update license with the new license before flash. License = 0
PROBLEM:
When doing the ECUtek update. File cannot update.
Solution: Check your internet connection
If I am incorrect can someone please advise.
I also was have a look at the other application and it gets a lot of info. It would be good if they do something like the DEFI and the HKS OBD-II Apple and Android app and also maybe setup a live graph while you drive.