|
I did not get any special engraving or pattern on my shorty. I did find that due to the fact this is all metal, it doesn't bite into the threads a the end, making it easy to accidentally loosen.
So I took a small piece of thin cardboard and jammed it into the knob all the way, then screwed it on the shifter. The threads bite into the cardboard at the end, the friction is plenty for a solid grip that is not going to come lose, but you can take off any time you want it.
I'm sure you could do this to make your engraving pattern line up the way you want, you'd probably just have to try a couple times.
|