[xjohnx]

Originally Posted by DSTL

For those looking to do any data logging, here is how. I was missing the first step of opening the tune ROM first (doh!) which just got frustrating. So.... much of this is quoted from John helping me out and hopefully will save him a little time with questions:

In ProECU, click on FILE -> Open Rom File and open your tune (RR-1xxxx)

With the car running and laptop connected to the car click on map access , once the numbers start moving click on log to file.

When done- click log to file, then map access again.

Datalog will be saved in c:\ecutek\map access logs

It can now be viewed, graphed, emailed, etc

Very helpful post.