[WTF]

Originally Posted by Rossman

Over here, at least in Canada where the front plate is required, the plate mount on the front is screwed into the black plastic "honeycomb" grill on the front....resulting in two less than desirable holes in the solid plastic part of the honeycomb...

Those two screws hold on the plate holder (through the bottom two holes), then the plate itself it mounted to that via the top two holes.

Thanks for the feedback.

So is yours the same as this:



Any chance you can shoot us a picture of what a Canadian plate looks like and how far apart its mounting holes are? I am interested to know whether our brackets would be at all useable in other countries or not.

Thanks again.

Mark