Quote:
Originally Posted by sesmls
Yes, it doesn't sit very high up or too forward, so it's easy to unplug it...it's visible and accessible from underneath without removing the plastic panel under the steering wheel. And BTW, I just left the original flasher in place after unplugging it, and used some 3m interior adhesive trim tape to secure the new flasher to a nearby flat surface. Probably if you remove the lower plastic panel you can get easy access to the screw/bracket that holds the flasher in place, but I decided it was easier to just leave the old one where it was -- one less thing to track down if I decide to reverse my installation in the future.
|
Sounds pretty much plug and play right?
Does this device also remotely control the windows or is this just for the tap turn feature?