Quote:
Originally Posted by Drifter X
Awesome update. Sorry. Longtime lurker on your build. How do the extra sensors plug into the Link ECU?
Sent from my iPhone using Tapatalk
|
There are a bunch of unused inputs on the board that are just pins sticking up.
Link sells a harness for like $50 but I bought the connector (digikey part 455-2154-ND) for $0.18 and the matching pins that crimp onto the wiring (digikey part 455-2050-1-ND) for $0.02.
I bought a bunch of each to have around, but no sense in buying a premade one for $50 when I can make the same thing for less than a dollar and not have a ton of wiring I have to cut or hide somewhere in the dash.
You wire the sensor to the connector, and then tell the ECU "hey, aux input 00 and 01 has a value of 0 at .5v and 150 at 4.5v. " and you title that "oil pressure"