[Racecomp Engineering]

Originally Posted by EndlessAzure

Necropost, but worth an update:


Having owned a Brembo GT kit for a while now, I've come to believe the reason these were discontinued is because the brake lines would tend to rub away at the support and leak.

• See Image: https://www.ft86club.com/forums/show...15&postcount=6
• The Goodridge brake lines that came with my Brembo GT seem especially prone to this, as it's a slip holder rather than a fixed holder. The stainless line coating showed obvious wear. I wrapped electrical tape around it to help reduce movement and serve as a wear buffer; it's held up for a few years now, but I plan to replace them with the factory hoses when I overhaul them.

I also found the original recall notice by TRD in pdf, which corroborates this, attached

It's for this reason that I don't really care for stainless lines most of the time. They don't make that much of a difference anyway.

- Andrew