[ruturaj001]

Just in case anyone read this and is looking for more info.

I was able to get -2.8 and -3.0 camber without bolts. This will give you an general idea of camber. You might get +-0.5 degrees.

The ride height dropped more than what's in manual, by about 0.5 inch. Ride height is tied to preload and I started to run in to not enough droop if I raised the height. I decided to get spacers to lift the car.

The adjusters can get stuck, the plastic knob bends, I bought multiple metal adjusters and spent over $100. I couldn't get rear one to break loose due to spacers I was using. The adjusters lacks clicks as well.

I have seen complains about other hardware but it is easily replaceable. Koni has lifetime warranty and overall performance was pretty good. I ended up selling them.