Quote:
Originally Posted by J95
Then I measure ride height after shop alignment:
323 mm / 325 mm
Which is a drop of ~45 mm
This is a huge change in ride height, isn't?
|
Did you ask them to change the ride height? If you only asked for alignment (i.e. camber and toe adjustment) the ride height shouldn't have been changed at all.
Personally I would either find a good race shop that you can work with to set your suspension and will respect your exact specifications for ride height, camber and toe, and can do corner balance as well. Or do the alignment myself - camber is quite easy to do with a digital angle gauge; toe is harder, but toe plates will get you close if you only need to correct toe from camber change and most alignment shops could manage to correct toe if needed.