Quote:
Originally Posted by BishamontenZC6
Coming back with the solution after installing the braces a few days ago, for those who will come after. Everything worked fine with the OEM LCA to knuckle bolts. They are a little bit shorter than 80mm but were ok.
I can't emphasize enough how much of an improvement those braces bring on the rear axle. More direct transmission of the torque to the road even from low rev, better curve exit stability and a global more solid behavior on bumps. For the price of them, that's 10/10 for me.
|
I used to have them on, they made the rear feel much more unified; one of the best Unfortunately I had to take them off as I got the MCA traction mod which occupied the trailing arm mount; it would not fit.
However I've seen similar braces which mount onto the lower arm similar to the Cusco, but instead mounts onto the rear subframe on the other end. Pretty cheap as one of the companies manufacturing these bars is where I live, but not sure if it will have the same effect.