View Single Post
Old 07-28-2025, 06:15 PM   #19
Scargod
Track Day Junkie
 
Scargod's Avatar
 
Join Date: Nov 2021
Drives: 2022 BRZ Limited
Location: Connecticut
Posts: 184
Thanks: 105
Thanked 142 Times in 80 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
To revive this... I thought I'd share what I'm doing. This is my track car, the new Red 2022 that replaced Blue.
I have an oil cooler in the front. It's on the right, lower side of the radiator area. I have a snorkel for the CAI that comes halfway down on the left side. There's no purpose to fans when racing and moving. There's the rub: when moving. Sometimes I've had to sit in the pit line for five minutes or longer. It's not good to get caught not running and hold people up when it's time to go.
I've removed the right fan and I've cut away almost all of the fan shroud that restricts airflow. If need be, the one fan will come on.
I plan on posting pictures as I get it all back together.
This and the TSS Fab subframe and loosing most of the plastic at the bottom of the bumper fascia will net about a 10 pound loss and I've removed the AC which is good for approximately another 10 pounds. I think the headers and the completely adjustable suspension will help as well. I may get under 2,600 pounds, and that's with the CMS Performance Roll Bar installed.
TSS Fab rear subframe is on its way...
Scargod is offline   Reply With Quote
The Following User Says Thank You to Scargod For This Useful Post:
new2subaru (07-28-2025)