Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

leb_crx · 03-24-2025, 04:31 PM

I am doing the following wheel/alignment mods all at once and looking for feedback on alignment specs; I been getting mixed information and hoping to find a setup that'll be a balance between street and track (4 full days a year roughly). Any feedback is appreciated

Specs:
Front Camber -3
Rear Camber -2.5
Toe out front 1/16 to 1/8
Toe in rear 1/16

Mods:
-Enkei RPF1’s 17X9 +35 square set up
-Hankook Ventus RS-4 255/40/17
-H&R lowering springs (25mm drop)
-Verus engineering camber plates
-Whiteline rear ajustable LCA
-Rear fender tab cut
-Arp extended wheel studs

Also, can anyone confirm if the rear toe is adjustable from factory?

03-24-2025, 04:31 PM	#1
leb_crx Junior Member Join Date: Oct 2019 Drives: 2023 BRZ Location: Ottawa, Ontario Posts: 4 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Alignment feedback I am doing the following wheel/alignment mods all at once and looking for feedback on alignment specs; I been getting mixed information and hoping to find a setup that'll be a balance between street and track (4 full days a year roughly). Any feedback is appreciated Specs: Front Camber -3 Rear Camber -2.5 Toe out front 1/16 to 1/8 Toe in rear 1/16 Mods: -Enkei RPF1’s 17X9 +35 square set up -Hankook Ventus RS-4 255/40/17 -H&R lowering springs (25mm drop) -Verus engineering camber plates -Whiteline rear ajustable LCA -Rear fender tab cut -Arp extended wheel studs Also, can anyone confirm if the rear toe is adjustable from factory?