[moonspoon]

So I had left the plastic and aluminum under body panels off so I could still access everything. This turned out to be a bad choice because while on the freeway the now unsupported front end of the fiberglass under body panel caught the air and ripped it partially off. I could hear something scraping but everything still worked fine mechanically.


When I got home I cut out a portion of the aluminum panel to clear the recirculating dump tube and installed it and the plastic front panel back. Guess I'm adding a replacement fiberglass panel to my shopping list.




My oil drain back hose was rubbing on the belt so I pulled it away with some zip ties but am gonna think on a better bracket or belt guard or something better than zip ties.