Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

AEBRacing · 11-09-2024, 12:55 PM

Hi guys!!! for those people that have experience in this KW kit w/Rotrex C30-94 and small pulley (diam 90mm 13/14 psi)

Finally, I flashed the ECU with local Ecutek Tunner Certifícated here in Argentina, I have the KW kit with SC Rotrex C30-94 small pulley (diam 90mm and >13 psi) and others mod like Skunk2 El header, Tomei OP, and 2,5" exhaust pipe w/o CAT

Unafortunatly the tunner said the map was restricted caused by OEM fuel injectors capacity, the RPM were limited to max 7k due to the fuel injectors capacity, after that the % of injectors charge required more than 95% and the AFR started to increase dramatically

Did you have similar experiance with this configuration in terms of OEM restriction fuel injectors? I undestand the FA 20 engine require and special rich AFR close to 11,4 with Forced Induction kits and this requirement force to change the OEM fuel injectors for others with more capacity

Please could you share your experiance and recommend brand and type of aftermarket fuel injectors kit to use for tis type of KW kit configuration?

Thanks for your help!!!

11-09-2024, 12:55 PM	#4310
AEBRacing Member Join Date: Jul 2020 Drives: Toyota FT86 Location: Buenos Aires Posts: 27 Thanks: 3 Thanked 1 Time in 1 Post Mentioned: 0 Post(s)	Fuel Injector needed for small KW C30 pullley (diam 90mm) Hi guys!!! for those people that have experience in this KW kit w/Rotrex C30-94 and small pulley (diam 90mm 13/14 psi) Finally, I flashed the ECU with local Ecutek Tunner Certifícated here in Argentina, I have the KW kit with SC Rotrex C30-94 small pulley (diam 90mm and >13 psi) and others mod like Skunk2 El header, Tomei OP, and 2,5" exhaust pipe w/o CAT Unafortunatly the tunner said the map was restricted caused by OEM fuel injectors capacity, the RPM were limited to max 7k due to the fuel injectors capacity, after that the % of injectors charge required more than 95% and the AFR started to increase dramatically Did you have similar experiance with this configuration in terms of OEM restriction fuel injectors? I undestand the FA 20 engine require and special rich AFR close to 11,4 with Forced Induction kits and this requirement force to change the OEM fuel injectors for others with more capacity Please could you share your experiance and recommend brand and type of aftermarket fuel injectors kit to use for tis type of KW kit configuration? Thanks for your help!!!