Quote:
Originally Posted by strat61caster
If you can get the obdmx whatever software to pull can channels and data - which iirc is possible on the early cars and that system, solostorm should be able to see it and log it. I’d at least fiddle with that for an hour or two before giving up on a $100 piece of hardware.
You may have to manually map a can channel in the obd reader, save that profile so it loads up every time you hook it up, and then map that channel on the solostorm side as well.
|
I've been using a OBDLink MX+ in my 2013 for awhile. I have been using Track Addict but I also tried Race Chrono. What I discovered with Race Chrono was that it would do OBD
or CAN but not both at the same time. The research indicated that you needed two devices to interface with that purpose in mind. I also discovered that CAN didn't offer the same stuff as OBD and vice versa (at least with Race Chrono).