Quote:
Originally Posted by Ultramaroon
I suggest zeroing out the VSC system. Should be the minimum labor charge at the dealer. All they have to do is plug in and click a couple buttons. |
I have a similar issue and I’ve seen you talk about it a few times during my research. So I installed the fdf mega mantis kit and a hydraulic hand brake at the same time on my 13 Brz. I now have the traction control light on and abs light which Is probably normal after doing such modifications. I tired zeroing out the vsc with techstream and I keep getting a communication error. I’ve used techstream before to program my vin on my ecu without issue. Any idea on how to get around this problem?
Also when I press the vsc button or switch on the pedal dance feature on my trac box, nothing happens. Do I still need to use the trac box or an aids disabled from removing the abs? It seems like I still have traction when trying to brake loose. I’m getting mixed or vague info when researching.. I’ll post the error I’m getting. My scanner isn’t picking up codes, but techstream has a few and I will post them, TIA
Sent from my iPhone using Tapatalk