[Spuds]

Ok so new ride height and alignment numbers, millimeters from center of wheel to arch, and degrees:

Empty, no trunk junk, 1/4 tank of gas:
FL: 341.5 FR: 339.5
RL: 347 RR: 345

F Toe: 0
R Toe: -.01 (out)
F Camber: -4/-3.8
R Camber: -2.2/-2.1

---------------------------------------
Plus 200lb driver weight:
FL: 338 FR: 338.5
RL: 341 RR: 342

F Toe: 0
R Toe: +0.01 (in)
F Camber: -3.9
R Camber: -2.3

Interesting notes:
-Looks like with standard 7k/7k rates on the T2s, the front lowers at ~50% the amount of the rear when front seat(s) is occupied.
-Not entirely sure how I gained camber going higher in the front, but maybe something else was going on with ride height last I did an alignment.
-Goes around corners way better this way.

Also ran the Perrin 16mm rear bar on medium.

Overall this setup felt really good at my last AX. Might drop the rear bar down to soft though, as I got just a bit more oversteer tendency than I wanted. It was fast enough for a top 10 raw time though so I'm pretty happy.