Quote:
Originally Posted by Spuds
For future reference are the SSx plates compatible with Tarmac coilovers? (it's not obvious to me lol)
|
So be aware that with the SS plates you will likely lose some front camber as the strut protrudes up above the interface with the srut tower.
My car is kinda asymmetric, I was only able to get -3.2 degrees at the front left *with* factory camber bolt in the upper holes. Could probably could get around -3.8 at front right.
But for mid-corner front grip I'd rather have -3.2 camber *with* adequate bump travel than -4.5 with the outside front being overloaded due to being hard on the bumpstop... Also 330mm front ride height = no problemo...