Quote:
Originally Posted by cmiovino
RCE SS-1's (6k springs, even), with their camber plates up front, OEM ones in the rear.
Vorshlag vs RCE/KW camber plates won't make a huge difference in height between the two, comparing the two setups in terms of height should be very much the same.
|
I think that's way too low for T2s on the vorshlag plates. I recall that the RCE camber plates for SS raise the perch up a bit right? The vorshlag perches are actually lower than stock, meaning you lose bump travel. Anything below 13" is not going to go well at all.