Quote:
Originally Posted by Racecomp Engineering
This is a similar combination (KW type coilovers with same camber plates) with 170mm springs (so 30mm shorter) but I could go down another 45mm from here. I think my ride height was about 30 to 35mm lower than OEM. These are also slightly stiffer springs. I could slam the car really low.
I'm now using the exact same springs as you but with OEM top mounts. I'm about 20mm lower than OEM and could go another maybe 35mm lower. You should be able to go even lower with the CS camber plates.
- Andrew |
Andrew, thanks a lot for your time, really appreciate it
Sorry for late reply. Due to your inputs, I decided to go and dismount one front coilover myself. I will take pictures and show it here, so you guys can guide me about what the problem is. After that, I will take it to a professional to solve it properly
Btw I measured the height. The front drop is 1.37 inch (35mm), and the shock compression is 15 mm. Probably my goal is to leave it at 1.3'', trying to avoid the famous axle problems
Andrew, why did you go back to OEM top mounts? 🤔