OK so I posted this question already on the general forum when I should've posted here. (Original Post Link At The Bottom)
So im building my turbo kit have everything mocked up besides the driver side PCV hose that is under the compressor (The hose that connects to the intake boot originally). You'll see my set up through this link that it's not a kit from a manufacturer. I sourced/"fabricated?" most of the throttle body piping myself. I just have this hose sitting there and I don't know what to do with it. You can see that I already have a catch can for the rear PCV valve. But I don't know what to do with the front one. LMK thank you guys, yall are clutch!
https://imgur.com/a/yQKyoXW