[Opie]

Got around to tearing Engine #2 down completely on Sunday, water in the oil does not make for good lubrication....and causes some different damage. As suspected/usual rod bearing #3 was literally just washed out, also the water washed the teflon coating off all of the pistons and rusted the rings. Good news, no scoring on the cams or carriers. Pickup was clean

Parts have been ordered to repair;
Crankshaft
Pistons (4)
Ring set
ACL Main Bearings
ACL Rod Bearings
Connecting rods (2)
Misc gaskets, seals, orings, etc...

Going to hone the bores, disassemble, clean and oil everything then reassemble once the parts arrive.