Hey all, I apologize if this isn't the proper place but I was hoping for some ideas. I recently installed Tomei Uel headers on my 2017 brz with 140,000kms
During the second drive, after reinstalling the skid plate I can hear this vibration/tin like noise from the front right side of the car. It's very obvious when getting past 4k rpm.
(
Most obvious in video after 3rd rev)
Just as a short list of what I have tried, I checked for contact along the skid plate itself, there was two small points of contact but I have since corrected them.
I retorqued all the bolts connecting the header to the block and overpipe.
Felt around the over pipe and its not contacting the sub frame
Any help is much appreciated
Sent from my iPhone using Tapatalk