Stock front end link install questions...
I have a few specific questions regarding the correct installation of stock front end links:
1) The 2022+ torque specification for the end link to sway bar that I found is 55 ft-lbs... this seems high to me; can anyone verify that this is the correct value?
2) There is very little room to tighten the end link to sway bar nut while using a hex key and crow foot. Given the spherical ball nature of the stock end links, is the allen key really necessary while tightening? It would be a LOT easier to use a standard socket on the torque wrench...
Thanks in advance!
__________________
Quote:
Originally Posted by drewbot
Pull out
|
|