Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Washer Fluid Spray

RT-BRZ · 03-14-2024, 10:45 AM

I feel stupid for posting this but the solution is escaping me.

Running the washer on the windshield results in a spray that's about 6" or so out the nozzles.

I've blown out the lines and cleaned them with vinegar/distilled water. The spray using that level seems to be fine.

I've replaced the factory washer pump with a Trico aftermarket pump.

The results are the same. The spray is the same out of each side.

What am I missing?

03-14-2024, 10:45 AM	#1
RT-BRZ Senior Member Join Date: Jan 2021 Drives: 2013 Subaru BRZ Location: Columbus, OH Posts: 479 Thanks: 579 Thanked 301 Times in 186 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Washer Fluid Spray - Low Flow I feel stupid for posting this but the solution is escaping me. Running the washer on the windshield results in a spray that's about 6" or so out the nozzles. I've blown out the lines and cleaned them with vinegar/distilled water. The spray using that level seems to be fine. I've replaced the factory washer pump with a Trico aftermarket pump. The results are the same. The spray is the same out of each side. What am I missing?