Quote:
Originally Posted by cmiovino
On that point, I've been looking at RLCA's for installing a set of coilovers for autocross use. I was under the impression they were needed or your camber could be all out of whack. I'd love to just keep stock if it gave anywhere between 2.0-2.5 degrees, but isn't that a crapshoot to just take that chance?
|
Somewhat a crapshoot, I've been fortunate enough to be within ~0.2* between the rears on my cars ('17 and '23, both lowered ~30mm, both around -2.7 rear camber +/- a tenth to 0.15 per side. Honestly I wouldn't worry if it was +/-0.25 per side, say -2.5/-3.0 for rear camber.