View Single Post
Old 10-09-2023, 11:38 AM   #1726
funkjaw
Senior Member
 
Join Date: Sep 2017
Drives: 16' WWB
Location: Austin, TX
Posts: 175
Thanks: 209
Thanked 126 Times in 61 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Anyone get a P1300 Trigger Sync Error code?



Basically I went to start my car up after not driving it for a week and it was a pretty weak crank. After cranking for a bit I put a jump charger on it so I wouldn't kill the battery. Tried cranking some more, still wouldn't fire up. Then tried clear flood cranking it where you put the gas pedal to the floor and after some effort it fired up. Idle was super duper rough and I had to give it some gas to keep it alive but eventually it idled on it's own and started running normal.

This sprung up before some time ago and I swapped the two cam sensors around to see if it would fix it. But it did not. I am half thinking maybe I am flooding it from having a weak crank which is why clear flood trick works.... and maybe the error is just from having a weak battery while trying to crank and actually has nothing to do with my cam sensors? Ionno, any thoughts guys?
funkjaw is offline   Reply With Quote