Quote:
Originally Posted by Jmudge
Sure thing!
Ride heights from the floor to the center of the fender well.
Front: 24"
Rear: 25 5/8"
Alignment
Front Camber: -4.6*
Front Toe: 0.10* out
Rear Camber: -2.5*
Rear Toe: 0.10 Toe in (equates to about 1/16" total in)
Regarding my ride height, I'm pretty confident there is too much rake/the front is too low. Believe I'm giving up too much front compression upon lifting and braking, as I think I'm hitting the bumpstops and it just pushes or brakes like shit.
|
Wow! Yeah sounds like the front is way too low. I'm at a little over 25" both front and rear measuring that way. I could go lower for sure but definitely not a whole inch lower. I'm also pretty sure the only way that works is if you're hitting bumpstops a lot, like you said. Interesting.