View Single Post
Old 09-08-2023, 12:31 PM   #1
Evolbrz
Member
 
Join Date: Feb 2022
Drives: 2017 BRZ 3.0L swap
Location: quebec, Canada
Posts: 31
Thanks: 22
Thanked 44 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
dead oem fuel pump with 42k

ok so my oem fuel pump died I will replace it with a DW65C.. but I want to see if anybody can help me understand what happened.. dont think its normal.

some facts.
*swapped in a EZ30 engine using the stock fuel lines to each bank.
*left evap hose open one middle of the oem fuel hoses.
*the whole evap not running anymore because I dont have the stock ecu anymore.
*driving fuel pump with 40a relay on key switch so it runs constantly.

I need to be educated on how fuel tank venting works because I seen some use check valves etc.. remove pressure on the tank..etc.. I have a gut feeling my oem fuel pump died because of this?? how does one delete evap and make sure tank is vented .. etc..

any help appreciated

EvolBRZ--
2017 subaru BRZ Swapped EZ30
2021 subaru WRX my stock daily
Evolbrz is offline   Reply With Quote