Quote:
Originally Posted by Rex1585
Just an update since I haven't had much, if anything, to make a video about in a while.
I am still waiting for some odds and ends to be delivered.
I designed a bronze bushing for the shift housing that has o-rings in it, once the bushing shows up I can finalize the housing for the shifter and get it made and move onto the cable linkage next.
I'm also waiting on a few more parts to be 3D printed for the torque tube. I have the basic design for the transmission side of the driveshaft to transmission input shaft made up and a friend is printing it. Once that is done, I can test assemble all of the components for the torque tube on the transmission side. I'm having to make a slight redesign of the clutch side of the torque tube flange to allow the higher engine speed of the F136 to not nuke the bearing that works for the Corvette. I hope to have that figured out and finalized pretty quick.
Once that is all done, I will be able to start the process of mounting the engine and transmission!
Sent from my Pixel 7 Pro using Tapatalk
|
You sir are very talented... what an epic build.