Quote:
Originally Posted by Ultramaroon
Is there any fluid above the gasket line? If so, it's not the pan.
Most likely it was shoddy surface prep before applying the RTV.
|
I don't see any above, and it's only on the back side of the back side where you see it in the pic. Everywhere else is clean. I'm thinking you're right about the bad prep work.
Quote:
Originally Posted by Muskoka800
Are you confident the gasket was replaced? Looks like a bead of orange RTV along one edge.
|
The RTV is connecting the other part, I know it looks like it's on the pan but if you look closely on the pan edge you can see the black gasket.
I had this done at Toyota, was hoping they would have done a better job.