Quote:
Originally Posted by Desertnate
I thought the same thing until I applied Mohs EVO a couple months ago. Crazy easy to apply.
You don't really have to wait for it to flash. Just apply it to an area about 2' x 2' and it will flash by the time you put down the applicator and pick up the buffing towel. Buffing is almost effortlsess and I only needed a single, low nap, MF towel. I didn't have to use two different types like you describe in the removal of CQ UK. It took me almost half the time I spent applying CQ UK to a similar sized vehicle.
The icing on the cake is, I think it actually looks better too.
OP: Either way you go, a DIY job is not hard. You'll save a lot of money and get to spend some quality time with your car.
|
You probably are applying the right amount of product then!
I've let my business partner apply the coating and tends to get a little heavy handed putting UK on the applicator.
I've looked at Gyeon coatings as something to possibly introduce as package offerings, heard good things.
Might be something to experiment with on my wife's car since I need to clean hers up.