Quote:
Originally Posted by Flarpswitch
My 2022 had the metal threaded inserts in the front for the license plate, but the spacing does not match the holes on the plate. Rather than drill out where the dimples are, I drilled new holes in the license plate and got the appropriate stainless steel screws that fit the threads. The dealer already screwed on a license plate frame on the back. In place of the two upper mounting screws, I used two stainless 'Well Nuts', the ones that have the expanding rubber grommets. Using machine screws makes for a cleaner fit. Self-tapping screws could strip out.
|
You could have used Subaru bracket that allows to use those holes and not drill new ones.