Aside from the fact that it's pretty overkill on a car with so little power..
What exactly is needed to run this set up?
-17x9.5 with 255 or 265 tires
-https://www.apexraceparts.com/shop-by-vehicle/subaru/brz-frs/17x9-5-et40-apex-vs-5rs-forged-86-brz-wheel.html
The use case is mostly DD with occasional autox/track. Currently I have front and rear SPL control arms. Looking into getting RCE SS1, so with the camber plates I am assuming -3 to -3.5 should be achievable
1. In terms of clearance, will RCE SS1 be sufficient in getting the adjustments I need? Was researching this fitment and the Apex rep mentioned something about coilovers with slim silhouette (ref
here)
2. In terms of performance dynamic, the goal is to run Hankook RS4 level of grip tire that will have at least some longevity compared to tires like RE71Rs. Would the standard spring rate and damping on the RCE SS1 "match" this level of size and grip?