Would appreciate it so much if someone can diagnose wtf this is. I've been trying to solve it for half a year, spending loads on repairs and parts. About ready to just swap the kit out.
The kit is a budget Wilwood 2 piston caliper with slotted rotors package from RR-Racing.
Things I've tried:
Used BP10 and Polymatrix Q compounds, both supposed to be quiet and low brake dust.
Wilwood support has been unhelpful, telling me to center the caliper and buy shims. Caliper is dead center and I bought shims off of them and noise is the same.
Brakes have been freshly bled.
Anti-seize at all contact points.
Things to note:
Like title states, noise is heard when coming to a stop. Usually no noise until brakes are moderately used. It also may occur at low speed corners when the brake is depressed a certain degree. Soft braking and hard braking do not trigger the noise.
Cheers.