|
PP dampers on my '17 were *hard* onto the bumpstops just parked, but with lower springs than yours. Swift BRZ Sport, nearly -1.5" That was definitely way more than the Sachs struts could deal with, even after cutting bumpstops first in half, and then down to 1/3 (~20mm). You're not as low, but during cornering I'm sure you are finding the outside front bumpstop pretty early on, and of course ride quality at that point is not very smooove! Could be part of what you're feeling here. Recommend Bilstein B6 or B8, they have a ton more bump travel up front, they worked like a charm in my case.
|