Hi all,
I know there has been countless posts regarding what the different wires are but somehow my connector configurations dont seem to match any of those found on the net or forums. Id really appreciate the help because Im installing a new 10.1" Eonon Q03Pro, and although I got it working the HU seems to start up as if freshly installed every time I switch on the car. Im guessing I must not have connected the constant(+) correctly. Also my reverse camera refuses to activate (Im guessing I run the power to one of my tail lights). I have the OEM head unit which didnt have a screen, just a small LCD, so dont know if I will have a reverse trigger (I tried the pink cable running from the trunk area, doesnt worK). Any help at all would be appreciated
From the screenshots I have
10 pin
Orange
Purple
red/black line
Red
Black/blue line
White
6 Pin
Blue/white line
blue
Yellow
26 pin
pink/black line
yellow
white/blue line
brown
blue/pink line
blue/yellow line