Quote:
Originally Posted by autoracer86
My question is about toe and roll center adjustment
At what amount of ride height change should one consider getting RCA kit up front ?
Same question for adjustable toe links in the back... Target rear toe would be 0
last question is there anything on the market to adjust rear roll centers ?
Thanks
|
Past 30mm of lowering (arc fender to hub center, stock is 375mm), which is around 140mm pinch weld height on stock wheels.
To adjust rear roll center I suggest you to play with upper control arm offset bushing and get the camber back to spec using the lower arm. Otherwise you have to shim the entire subframe, SPL makes a kit for this purpose. .
As for the 0 toe you should not have any problem till 40mm of lowering.