Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

NoHaveMSG · 03-30-2023, 02:54 PM

It arrived, quite quickly actually. They also included a piece of the box for the bearing with the part number in the package which I thought was very cool of them to do. It is a Toyota genuine bearing PN 90363-40022.

So it is significantly longer than the stock TOB. I will take some measurements when I have time. The amount supported by the quill is not as long as it appears, but it is I would say about a 1/3rd longer then the stock TOB. Pictured is an Exedy replacement TOB from their OEM replacement clutch kit. I will also check fit on my spare transmission which is here at work later today. I am pretty happy with it on initial inspection.

03-30-2023, 02:54 PM	#14
NoHaveMSG Senior Member Join Date: Jan 2018 Drives: Crapcan Location: Oregon Posts: 11,612 Thanks: 18,894 Thanked 16,899 Times in 7,691 Posts Mentioned: 112 Post(s)	It arrived, quite quickly actually. They also included a piece of the box for the bearing with the part number in the package which I thought was very cool of them to do. It is a Toyota genuine bearing PN 90363-40022. So it is significantly longer than the stock TOB. I will take some measurements when I have time. The amount supported by the quill is not as long as it appears, but it is I would say about a 1/3rd longer then the stock TOB. Pictured is an Exedy replacement TOB from their OEM replacement clutch kit. I will also check fit on my spare transmission which is here at work later today. I am pretty happy with it on initial inspection. Attached Images __________________ "Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde. Last edited by NoHaveMSG; 03-30-2023 at 09:00 PM.