Quote:
Originally Posted by DarkPira7e
Plate is 6mm thick
|
Hmmm so same as the 1/4" plate that I got. Thanks for checking!
Got the plate cut out and mocked up yesterday:
Quote:
Originally Posted by Grady
Make the plate yourself. There are enough info and pictures to figure out everything.
|
The plate is the easy part, where I'm hung up is how to modify the pump now that the 1/4" plate bumps the pump away from the cam enough that it doesn't engage well. Basically need to extend that slotted cup 1/4" closer to the cam. And, no, there's not a lot of info out there to figure it out solely off that information alone. I had to reverse engineer everything based off my existing plate and dimension the pump holes myself. Took a lot of trial and error, but having a 3d printer allowed me to make several test pieces so I only had to cut of out of steel once.