Quote:
Originally Posted by Racecomp Engineering
Bilstein B6 + RCE Yellow is one option.
Zdan uses B6 + Swift Spec R springs.
Are you allowed to run camber plates?
- Andrew
|
Thanks!
We are, and we do. They are 20 pts per pair, 10 points=1 penalty lap per 8 hours of racing.
The MCS coils were getting us 140 points total, a spring/shock combo would be at most 20 points total.
Rules on spring replacement:
“Suspension Springs, non-OE coil springs are 5-points per corner
- Exemption: Vehicles may replace OE coil springs for 0-points provided that the replacement spring:
▪ Is the same shape as the OE spring (straight, frustum, beehive/keg, etc.).
▪ Maintains the exact same ID/OD measurements as the OE spring (+/- 0.25”) when measured at the midpoint and at each end of the spring
▪ Springs may be cut and/or used with spacers (spring rubbers) for no additional points
▪ Shape and measurements must match when the springs are in their original
unaltered condition”
Not sure if any of your suggested meet the exemption reqs.