Quote:
Originally Posted by pym19109
I will ask a cnc shop for making a pedal spacer. Instead of drilling and cutting.
Verus spacer as a reference but use the lower hole of pedal bracket as mounting point of a spacer and flatten of the broke one. Honestly, I don't feel comfortable for cut or drill anything if I have another choice.
|
That’s a good idea. If you can get a CAD file sites like sendcutsend.com is a cheap place to have parts made.
Just FYI you can run about 10mm thick and still use the factory bottom stud to hold the pedal. I am running 10mm spacer and using the factory studs. If you go with a thicker spacer you may need to space out the pedal stop too or you risk damaging the pedal.